Light-weight clinching tools have been designed to be as simple to use as any other power tool.
The three product lines Red Challenger, Alligator and Compact all have the following common
Key features
- High pressure oil circuit for compactness
- Closed oil circuit to essentially eliminate the risk for oil spills
- Light, but robust workhead, short and slender for minimum inertia and ease of manoeuvering
- Manual opening/closing mechanism, easy to operate by right-handed as well as left-handed operators
- Connecting piece for straight or 90-degree handle
- Handle with safety trigger
- Hydraulic hose package with robust protection against wear and tear
- Air-over-oil booster to be connected to any source of clean and dry compressed air at 87 psi, 6 bar, be it a factory net or a small size garage type compressor
Workhead weight
7 lbs, 3.5 kg
Cycle time
0.6-1.0 seconds
Air consumption
per clinch joint: 0.21 cuft, 6 liters
Capacity
Mild steel:
2x16 ga, 0.120"
or 3 mm total
Stainless:
2x20 ga, 0.080"
or 2 mm total
>>>back to top
>>>back to products
|
Red Challenger is a highly successful pre-packaged and ready-to-go clinching tool with an articulation mechanism allowing easy straddling of flanges.
In addition to the key features listed in the left-hand column, the Red Challenger includes:
- Standard, rectangular tool kit
- Straight handle
- Rotator
Article number
74 00012 Red Challenger 0403 AS
>>>back to top
>>>back to products
|
|
The Alligator line features several models. While conceived for general use, the different models are designed to fit particular constraints from primarily an access point of view. For details on workhead geometry, please consult the Documentation library
In addition to the key features listed in the left-hand column, the Alligator line models include:
A wide variety of tool kits are available, 4-bladed round, 2-bladed round and rectangular. For details please consult the Documentation library
Article numbers
74 00006 Alligator 0302 AS V4
74 00007 Alligator 0302 AS V5
74 00008 Alligator 0302 AS V6
74 00045 Alligator 0403 AS
>>>back to top
>>>back to products
|
|
The Compact line also features several models, meeting the requirements given by the particular geometrical situation at the joining zone. For detail on workhead geometry, please consult the Documentation library.
In addition to the key features listed in the left-hand column, the Compact line models include:
A wide variety of tool kits are available, 4-bladed round, 2-bladed round and rectangular. For details please consult the Documentation library.
Article numbers
74 00010 Compact 0302 AS V1
74 00011 Compact 0403 AS
84 19351 Compact 0405 AS
>>>back to top
>>>back to products
|
|
|
